IGP10-T22C1F|智能电子模块|可靠地测量表压力|
IGP/IAP10 系列压力变送器采用高精度、高稳定性的美国福克斯 （FOX）公司传感器组
件，通过高可靠性的智能电子模块，将被测介质的表压或绝对压力转换成二线制 4～20mADC
的标准信号输出外，还可用HART（Highway Addressable Remote Transducer）协议或 FF（FOUNDATION
Fieldbus）现场总线提供数字信号输出，以方便地用软件进行远端组态和监控。
IGP/IAP10 系列压力变送器具有多种安装形式能精确、可靠地测量表压力、绝对压力或液
位,所有变送器均具有现场数字显示，直观地指示测量压力或液位。智能型产品的LCD多段显
示器可同时显示测量压力、电流或百分比，并以棒图形式显示测量值的百分度，当变送器出现
故障时，LCD指示器将显示报警信息。
IGP/IAP10 系列压力变送器采用标准模块化设计，具有相同的上部结构，可以方便地进行
更换或升级。具有多量程、多种安装形式、多样材质的传感器选装，以满足不同的现场工况需
求。当变送器需要同过程生产设备保持隔离状态时,可配接远传或直接安装的压力隔离膜盒。
膜盒密封隔离系统适用于腐蚀性、粘稠性、高温、有毒性、有卫生要求或容易积聚和凝结的过
程流体。
产品适用于气体、蒸汽或液体介质的压力、液位测量，广泛应用于石油化工、电站、冶金、
制药、食品、舰船及其它所有工业场合。
The IGP/IAP10 series pressure transmitter adopts the high precision and high stability of the FOX sensor group
Through a highly reliable intelligent electronic module, the gauge or absolute pressure of the measured medium is converted into a two-wire system of 4 ~ 20mADC
In addition to the standard signal output, HART (Highway Addressable Remote Transducer) protocol or FF (FOUNDATION) can be used
The Fieldbus provides digital signal output to facilitate remote configuration and monitoring with software.
The IGP/IAP10 series pressure transmitters are available in a variety of mounting forms to accurately and reliably measure gauge pressure, absolute pressure or fluid
All transmitters have a field digital display that visually indicates the measured pressure or level. LCD multi-segment display for intelligent products
The indicator can simultaneously display the measured pressure, current or percentage, and display the percentage of the measured value in the form of a rod chart when the transmitter is present
In case of failure, the LCD indicator will display alarm information.
The IGP/IAP10 series pressure transmitters feature a standard modular design with the same superstructure and can be easily carried out
Replace or upgrade. Sensors with multiple ranges, various installation forms, and various materials can be installed to meet the needs of different field conditions
Please. When the transmitter needs to be isolated from the process production equipment, it can be equipped with a remote or directly mounted pressure isolation capsule.
The diaphragm seal isolation system is suitable for corrosive, viscous, high temperature, toxic, hygienic requirements or prone to accumulation and condensation
Process fluid.
Products are suitable for gas, steam or liquid medium pressure, level measurement, widely used in petrochemical, power station, metallurgy,
Pharmaceutical, food, naval and all other industrial applications.
快速联系
经理： BeLin
电子邮件： 18005021035@163.com
电话：18005021035
包装和运输
1）有现货的货物，我们将在收到付款后3天内发出订单。
2）我们可以通过DHL，UPS，Fedex和EMS将货物运送到世界各地。包装很结实。如果您有任何特殊要求，请告诉我。
3） 您将在我们发送货物后大约 7 天收到货物。
您可能有任何问题
问： 你们的包装条件是什么？
答： 一般来说，我们将货物包装在带有泡沫衬垫的纸箱中，以防止货物损坏。
问： 你们的付款条件是什么？
答： 装运前 100% T/T。西联汇款，信用卡也是可以接受的
问： 你们的交货时间呢？
答： 一般在收到付款后 1-3 天。具体交货时间取决于订单的类型和数量。
