IS220PDIOH1A  |  I/O 包模块 |  用于工业涡轮机控制

型号：IS220PDIOH1A

　　输入电压范围:12-48VDC

　　输出电压范围:5VDC。

　　输出电流:最大10A。

　　效率:大于90%。

　　尺寸:170mm x105mmx32mm.

　　重量:约120g。

　　运行温度:-20°C至+50°C。

　　存储温度:-40°C至+70°C。

　　环境湿度:5%至95%相对湿度(无凝露)

　　产品描述

　　该IS220PDIOH1A是用于 Mark VIe Speedtronic 系统的 I/O 包模块。Mark VIe 是通用电气以 Speedtronic 的名义发布的后来的系统之一。自 1960 年代后期通用电气发布 Mark I 以来，Speedtronic 系统一直用于工业涡轮机控制。

　　IS220PDIOH1A有两个以太网端口和自己的本地处理器。它可以与IS200TDBSH2A和IS200TDBTH2A的端子板结合使用。这些 I/O 电池组/端子板组合已获准用于危险场所。

　　该IS220PDIOH1A的最小额定电压为 27.4 VDC。其额定值为 28.0 VDC。该装置及其相关接线板具有必须遵循的特定现场接线连接说明，包括电线尺寸和螺钉扭矩。此信息可在与本机相关的 GE 手册中找到，例如 GEH-6725。

　　IS220PDIOH1A 的前面板包括用于两个以太网端口的 LED 指示灯、用于设备的电源以及一个“attn”LED。其他 LED 与继电器连接有关。

　　有关此 I/O 模块或相关端子板的更多信息，请参阅通用电气的原始文档。手册、数据表和用户指南将提供有关安装、维护和处理的详细规范，在从 AX Control 拆箱之前应查看这些规范。

　　Model: IS220PDIOH1A

　　Input voltage range :12-48VDC

　　Output voltage range :5VDC.

　　Output current: Max. 10A.

　　Efficiency: greater than 90%.

　　Size :170mm x105mmx32mm.

　　Weight: About 120g.

　　Operating temperature :-20°C to +50°C.

　　Storage temperature :-40°C to +70°C.

　　Ambient humidity :5% to 95% relative humidity (no condensation)

　　Product description

　　The IS220PDIOH1A is an I/O package module for the Mark VIe Speedtronic system. Mark VIe was one of the later systems released by General Electric under the name Speedtronic. Speedtronic systems have been used for industrial turbine control since the release of the Mark I by General Electric in the late 1960s.

　　The IS220PDIOH1A has two Ethernet ports and its own native processor. It can be used in combination with IS200TDBSH2A and IS200TDBTH2A terminal boards. These I/O battery pack/terminal board combinations have been approved for use in hazardous locations.

　　The IS220PDIOH1A has a minimum rated voltage of 27.4 VDC. Its rating is 28.0 VDC. The device and its associated patch panels have specific field wiring connection instructions that must be followed, including wire size and screw torque. This information can be found in the GE manual associated with the unit, such as the GEH-6725.

　　The front panel of the IS220PDIOH1A includes LED indicators for the two Ethernet ports, power for the device, and an "attn" LED. Other leds are related to relay connections.

　　For more information about this I/O module or related terminal boards, please refer to GE's original documentation. Manuals, data sheets, and user guides will provide detailed specifications for installation, maintenance, and handling, which should be reviewed prior to unpacking from AX Control.