>>>>>型号:RMP-112D 继电器
【功能描述】
RMP-112D是一种过载反向功率继电器，主要用于发电机DIN导轨。
它有多种功能，如原动力的保护、三阶段测量、警报条件的LED征兆、Timer-controlled绊倒被激活的中转的LED征兆等。RMP-112D具有35mm DIN路轨或基地架置，安装类型为DIN导轨，触发电压范围在最多125V和最少25V之间。
RMP-112D过载反向功率继电器在配置PTMPM模块时应将其配置为“外部”模块。订购信息显示，PTMPM模块及其PTMIM接口板被视为一套匹配的组件，因此，它们通常不单独销售。然而，这两条电缆可以单独订购。
此外，RMP-112D继电器在配置过程中涉及到PTM产品线，该产品线包含PTMPM、其匹配的PTMIM和19“（0.5米）接口电缆。值得注意的是，RMP-112D的状态逻辑不使用梯形逻辑类型指令，而是使用“自然语言”编程指令。
>>>>>型号:RMP-112D 继电器
【英文介绍】
The RMP-112D is an overload reverse power relay that is mainly used in generator DIN rails.
It has a variety of functions, such as prime force protection, three-stage measurement, LED warning of alarm conditions, Timer-controlled trip activated transit LED warning, etc. The RMP-112D has a 35mm DIN rail or base mount and is mounted on a DIN rail with a trigger voltage range between up to 125V and a minimum of 25V.
The RMP-112D Overload reverse power relay should be configured as an "external" module when configuring the PTMPM module. Ordering information shows that the PTMPM module and its PTMIM interface board are considered a set of matching components, and as such, they are not usually sold separately. However, the two cables can be ordered separately.
In addition, the RMP-112D relay is configured with the PTM product line, which includes PTMPM, its matching PTMIM, and 19 "(0.5 m) interface cable. It is worth noting that the RMP-112D's state logic does not use ladder logic type instructions, but instead uses "natural language" programming instructions.
>>>>>型号:RMP-112D 继电器
