>>>>>型号:VM600IOC4T 输入/输出模块 机架式机械监控系统
【功能描述】
VM600 IOC4T 网络和处理器之间的输入/输出模块
VM600机架式机械监控系统使用的MPC4和MPC4SIL机械保护卡的高质量、高可靠性接口(输入/输出)卡。IOC4T卡支持4个动态通道和2个转速计(速度)通道，所有这些通道都可以独立配置。IOC4T接口卡安装在VM600 ABE04x机架的后部，在MPC4卡或MPC4SIL卡的正后方，以形成卡对。
特征
MPC4或MPC4SIL卡的输入/输出(接口)卡–支持4个动态通道和2个转速表通道
每个动态通道和每个转速表通道的差分信号输入和传感器电源输出
每个动态通道的差分缓冲(原始)传感器输出
每个动态通道的DC输出可配置为基于电流的信号(4至20 mA)或基于电压的信号(0至10 V)
>>>>>型号:VM600IOC4T 输入/输出模块 机架式机械监控系统
【英文介绍】
Input/output module between the VM600 IOC4T network and the processor
The VM600 rackmount mechanical monitoring system uses MPC4 and MPC4SIL mechanical protection cards with high quality and high reliability interface (input/output) cards. The IOC4T card supports 4 dynamic channels and 2 tachometer (speed) channels, all of which can be configured independently. The IOC4T interface card is installed at the rear of the VM600 ABE04x rack, directly behind the MPC4 card or MPC4SIL card to form the card pair.
trait
Input/output (interface) cards for MPC4 or MPC4SIL cards - supports 4 dynamic channels and 2 tachometer channels
Differential signal input and sensor power output for each dynamic channel and each tachometer channel
Differential buffered (raw) sensor output for each dynamic channel
The DC output of each dynamic channel can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V).
>>>>>型号:VM600IOC4T 输入/输出模块 机架式机械监控系统
