EPRO PR6423/000 是一款高性能的非接触式涡流传感器，专为工业应用中的关键设备监测而设计。以下是该产品的概述：
产品概述
品牌与制造商：EPRO PR6423/000 由 EPRO 公司制造，属于艾默生（Emerson）旗下品牌。
产品类型：非接触式涡流传感器。
核心功能：用于测量静态和动态位移量，包括轴振动、轴位移、轴偏心、轴瓦磨损、油膜厚度等。
应用场景：广泛应用于汽轮机、压缩机、泵、风机等旋转机械设备的监测保护系统，如 MMS 3000 和 MMS 6000。
特点
高精度测量：具备高线性度和高分辨率，能够精确监测设备的振动和位移。
非接触测量：采用涡流感应原理，避免与被测物体接触，减少磨损，适用于高速旋转设备。
防爆等级：可在防爆环境中使用，防爆等级达到 Eex ib IIC T6/T4。
温度适应性：工作温度范围广泛，从 -35℃ 到 +380℃。
多种配置：提供多种螺纹尺寸、电缆长度和连接方式，满足不同工业场景的需求。
技术规格
测量范围：0-20mm。
灵敏度：根据具体型号不同，PR6423 系列的灵敏度范围为 1.33V/mm 到 16V/mm。
输出信号：直流电压上叠加与轴振动成正比的交流电压信号。
精度：线性误差低至 ±1.0%，温漂和时漂控制在较低水平。
应用优势
可靠性：符合 API 670、DIN 45670 和 ISO 10817-1 等国际标准，能够在恶劣工业环境中稳定工作。
抗干扰能力：传感器及电缆具有良好的屏蔽设计，可在复杂电磁环境中准确测量。
易于安装与维护：出厂前完成线性校准，安装时无需额外校准，只需调整传感器与测量面之间的气隙。
EPRO PR6423/000 以其高性能和可靠性，成为工业设备监测的理想选择，尤其适用于需要高精度和高可靠性的场合。
The EPRO PR6423/000 is a high performance non-contact eddy current sensor designed for critical equipment monitoring in industrial applications. Here is an overview of the product:
Product overview
Brand and manufacturer: The EPRO PR6423/000 is manufactured by EPRO Corporation and is a brand owned by Emerson.
Product type: non-contact eddy current sensor.
Core function: Used to measure static and dynamic displacement, including shaft vibration, shaft displacement, shaft eccentricity, bearing wear, oil film thickness, etc.
Application scenario: Widely used in turbine, compressor, pump, fan and other rotating machinery equipment monitoring and protection system, such as MMS 3000 and MMS 6000.
peculiarity
High precision measurement: With high linearity and high resolution, the vibration and displacement of the equipment can be accurately monitored.
Non-contact measurement: eddy current induction principle, avoid contact with the measured object, reduce wear, suitable for high-speed rotating equipment.
Explosion-proof rating: can be used in explosion-proof environment, explosion-proof rating up to Eex ib IIC T6/T4.
Temperature adaptability: The operating temperature range is wide, from -35℃ to +380℃.
Multiple configurations: Provides a variety of thread sizes, cable lengths and connection modes to meet the needs of different industrial scenarios.
Technical specification
Measuring range: 0-20mm.
Sensitivity: Depending on the model, the sensitivity range of the PR6423 series is 1.33V/mm to 16V/mm.
Output signal: The AC voltage signal superimposed on the DC voltage is proportional to the shaft vibration.
Accuracy: Linear error as low as ±1.0%, temperature drift and time drift control at a low level.
Application advantage
Reliability: Compliant with international standards such as API 670, DIN 45670 and ISO 10817-1, stable operation in harsh industrial environments.
Anti-interference ability: The sensor and cable have a good shield design, which can be accurately measured in complex electromagnetic environments.
Easy installation and maintenance: Linear calibration is completed before the factory, no additional calibration is required during installation, just adjust the air gap between the sensor and the measuring surface.
With its high performance and reliability, the EPRO PR6423/000 is the ideal choice for industrial equipment monitoring, especially where high precision and reliability are required.
